GREEN SEAL™ CERTIFIED
This product meets the Green Seal™ standard for industrial and institutional cleaners based on its reduced human and environmental toxicity and reduced volatile organic compound content.
CLEANS
DILUTION RECOMMENDATIONS – Cleaning
| Floors – great for oily floors such as kitchens | |
| Marble Plastics Ceramic Concrete Porcelain |
Tiles Kitchens Equipment Garbage Bins Automotive Interiors/Exteriors |
DILUTION RECOMMENDATIONS – Cleaning
| Light Cleaning, Mopping | 1:127 1 ounce per gallon cold water |
| Routine Soiling/Cleaning | 1:32 4 ounces per gallon cold water |
| Heavy Soil & Spray Cleaning | 1:15 8 ounces per gallon cold water |
- Accell® Clean G works best when first sprayed onto a contaminated surface and then allowed to interact with the contamination for 1 to 10 minutes before wiping or rinsing. It is particularly effective at cleaning food and light motor oils.
- Any foam that is formed with high pressure sprayers should rinse off easily.
- Almost any type of dispensing system is fine – mopping, spraying, high pressure spray, walk-behind, steam cleaning, etc.
- Non-toxic to user and safe for use on most materials, but compatibility test recommended for delicate or decorative surfaces.
- For best results, replace the diluted solution every 1 to 2 weeks.
- Improper dilution can reduce effectiveness and increase risk of health effects.
- Disposal of packaging should be done in accordance with local, state and federal regulations. Spills should be flushed down the drain.
- Personal Protection Equipment: Safety goggles and rubber gloves are recommended.

