Oil and Gas Industry

With an expanded product offering that includes Accell Clean® DPP for heavier duty, tougher to remove contaminants, our products can provide improvements in cleaning efficiency and costs in a wide range of oil field equipment cleaning needs. These include valves, pumps, pipes and storage tank interiors/exteriors.

Our products were used extensively in the 2010 Gulf Oil Spill incident, replacing chemicals comprised of caustics and solvents that were unsafe for workers and the environment, with safer products at lower cost that dramatically improved performance. In addition, Advanced BioCatalytics offers unique solutions for decomposing of spilled oils and chemicals for use in both soil and open water applications, that are safe, fast and lower the costs of more traditional methods.
Products

Accell Clean® SWA - Surface Washing Agent - EPA NCP listed*

A surface washing agent for oil spills, petroleum contaminated beaches, marshes and rocky shorelines. EPA NCP listed* and licensed by the State of California, Department of Fish & Wildlife.

Accell Clean® DWD - Deep Water Dispersant - EPA NCP listed*

This deep water dispersent issued in marine and coastal waters to break up oil on the water's surface, causing it to disperse down into the water column, where natural processes can degrade the oil droplets. EPA NCP listed*.

Accell Clean® DPP - Heavy Duty Petroleum Equipment Degreaser

Cleaning fluid for oil field equipment, manufacturing facilities, metal fabrication, auto service facilities, and oil rigs, including offshore cleaning. Cleans heavy grease and oil, including storage tank sludge, for industrial and oil field applications, including crude oil and residual fuels such as heavy fuel oil, where they may be dried on or baked on due to weathering or heat.

Accell® SBR - Soil Bio-Remediation

A soil bio-remediation fluid specially designed for soil decontamination, includes a nutrient package to optimize microbial biodegradation, but does NOT contain any bacteria or enzmes. Designed to work with indiginous bacteria to accelerate the biodegradation rate of hydrocarbon and other organic contamination in soil.

PSC Frac1

PSC® fracturing fluid is optimized for high temperature and high pressure down hole. Superior surface and interfacial tension reduction allows fracturing fluids to be pumped to the target zone at a higher rate and reducing down hole pressure for improved recovery rates.

PSC EOR 1

PSC™ EOR 1 for fresh water systems is designed to be used as an enhanced oil recovery additive to lower the interfacial tension and improve recovery of oil. PSC™ EOR 1 is optimized for medium weight crude oils of API gravity between 20 and 35.

PSC EOR 2

PSC™ EOR 2 for brackish water systems, from 10-20k TDS, is designed to be used as an enhanced oil recovery additive to lower the interfacial tension and improve recovery of oil. PSC™ EOR 2 is optimized for light crude oils of API gravity from 30-40.
Proven Advantages of Accell Clean®
place cursor over image to stop slideshow

Oil Field Equipment Cleaning

Accell Clean® SWA was used extensively during the 2010 Gulf of Mexico oil spill for the cleaning of ships, oil booms and other equipment involved in the clean-up, resulting in considerable savings in time and manpower. With an expanded product offering that includes Accell Clean® DPP for heavier duty, tougher to remove contaminants, our products can provide improvements in cleaning efficiency and costs in a wide range of oil field equipment cleaning needs.
These include valves, pumps, pipes and storage tank interiors/exteriors.
oil storage tank cleaning with Accell Clean - before and after

Oil Storage Tank Cleaning – Exterior and Interior

Accell Clean® SWA incorporates patented technology that amplifies the ability of surfactants to penetrate, lift and clean contaminants from surfaces faster and more efficiently than other surfactants or traditional cleaners that depend on solvents and caustic chemicals to achieve their cleaning power. Demanding applications, such as oil that is aged in heat and sun, or oil sludge in oil storage tanks, can be removed more efficiently and safely that with traditional solvents or diesel.
Accell Clean® Line of Efficient and Safe Products for Oil Spill Cleanup
oil spill on a beach

Accell Clean® SWA Surface Washing Agent

Accell Clean® SWA showed an outstanding performance in cleaning of various equipment after the 2010 oil spill in the Gulf of Mexico. It is listed on the U.S. EPA NATIONAL CONTINGENCY PLAN PRODUCT SCHEDULE.* ACCELL CLEAN® SWA IS LICENSED BY THE CALIFORNIA DEPARTMENT OF FISH AND WILDLIFE as Surface Washing Agent for oil spill cleanup in California, satisfying very strict environmental safety requirements, such as passing the test for aquatic toxicity and being non-caustic and biodegradable (www.wildlife.ca.gov/OSPR/Legal, Index to OSPR Regulations, Chapter 8, sect. 885.6).

Safety

Accell Clean® SWA is waterborne and pH-neutral, and its safety profile greatly reduces the potential for chemical-related injuries compared to the high-pH products typically used for clean-ups. Accell Clean® SWA is safe for the environment, readily biodegradable and non-flammable.
oil spill on the ocean

Accell Clean® DWD Deep Water Dispersant

Accell Clean® DWD shows an excellent performance in dispersing oil spills in fresh water or salt water while at the same time enhancing hydrocarbon biodegradation by indigenous microflora. It is listed on the U.S. EPA NATIONAL CONTINGENCY PLAN PRODUCT SCHEDULE.* Contains no petroleum distillates or known endocrine disruptors, such as nonyl phenol ethoxylates (NPE)'s.